Trade Counter Open 8.30am-5pm
AutoDrain For Compressor 1/2BSP
AC 220V 1/2 Automatic Electronic Timed Air Compressor Auto Drain Valve
No Fitted Plug Supplied
Details:
Material: Metal
In/Out Port Size: 1/2"BSP
Flow Aperture: 5mm
Indicator Lamp: LED indicating power on / off
Voltage Range: ±10%
Protection Grade: IP65
Insulation: Class H
Maximum Working Pressure: 1.6Mpa
Maximum Temperature: 90°C
Ambient Temperature: -40°C to 60°C
The Largest Current Consumption: 4mA
Power Supply Voltage: 24-240V AC/DC 50/60Hz
Discharge Time (ON): 0.5--10 seconds
Time Interval (OFF): 0.5--45 minutes
Application: Widely used in filters, separators, dryers, gas tank, drip legs and other compressed air system components.
Package Contents:
1 * Electronic Drain Valve
Installation:
1. Clean the compressed air system before installation.
2. Note the direction of the arrow when installing the valve : outlet do not use the hose that not against the impact of air.
3. Power supply voltage should be consistent with the drain valve voltage: the positive pole must be connected to connector "1" when using DC.
4. When leave the factory the drain valve has connected to the cable, brown is Live L,blue is the Neutral N,yellow-green color is the safety ground wire GND.
5. Be sure to tighten the long screw on the terminal box to prevent water from burning.
Warning! When installing the electronic drain valve, make sure that:
1. Compressed air has been emptied (that is, under zero pressure).
2. The power supply has been switched off.
Xtreme Engineering do not supply a fitted plug please use a Qualified Electrian for installation